2,3,4,5 개월 무이자
5만원 이상
2,3,4,5,6 개월 무이자
5만원 이상
2,3 개월 무이자
5만원 이상
2,3 개월 무이자
1만원 이상
2,3,4,5 개월 무이자
5만원 이상
2,3,4,5,6 개월 무이자
5만원 이상
2,3 개월 무이자
5만원 이상
2,3,4,5,6 개월 무이자
5만원 이상
2,3,4,5,6 개월 무이자
5만원 이상
2,3 개월 무이자
5만원 이상
2,3 개월 무이자
5만원 이상
2,3,4,5,6 개월 무이자
5만원 이상
차량 랩핑은 기존 도장 상태가 시공 품질에 직접적인 영향을 주기 때문에, 도장 벗겨짐이나 녹이 있다면 반드시 사전 보수 후 시공하셔야 합니다. 업체 선택 시에는 포트폴리오(실제 시공 차량 사진)와 사용 필름 브랜드, 그리고 시공 기간을 꼼꼼히 비교하세요. 시공 후에는 왁스나 연마제 사용을 피하고, 중성 세제로 부드럽게 손세차해 주시면 랩핑 필름을 오래 유지할 수 있습니다.
안녕하세요! 랩케빈입니다~
오늘 소개해드릴 작업은 BMW X7 전체랩핑 제거 후 재시공입니다!
타업체에서 전체랩핑과 크롬죽이기를 시공하셨지만 만족을 못 하셔서 랩케빈으로 맡겨주셨습니다.
기존에 있던 필름 교체 시기가 와서 전체랩핑 작업을 맡겨주셨습니다.
Hello everyone! This is WRAP KEVIN~
Today I'll be introducing you to BMW X7 full wrap after removal!
Full wrap and chrome delete was done by another shop before, but customer was not satisfied and entrusted us for the job.
🔘시공차량 / Vehicle Details🔘
BMW X7 (G07)
🔘시공내용 / Work Details🔘
전체랩핑 / Full Wrap
🔘시공필름 / Film Details🔘
에이버리 슈프림 유광메탈릭골드
Avery Supreme Gloss Metallic Gold
🅦🅡🅐🅟 🅚🅔🅥🅘🅝
먼저 제거를 진행합니다.
사틴블랙에서 유광메탈릭골드로 전체랩핑을 합니다.
First, we remove the old wrap.
It'll be changed from satin black to gloss metallic gold.
먼저 도어를 시공합니다.
First, the doors are being wrapped.
다음은 본넷입니다.
본넷에 돌빵이 조금 많았지만 최대한 깔끔하게 랩핑을 진행하였습니다.
Next is the bonnet wrap.
Though there were a few stone chips, it was wrapped as best condition as possible.
뒤휀다 작업중입니다.
루프랙을 탈거를 하려면 내부 천장을 뜯어야 합니다.
이번 작업은 탈거가 크게 필요 없어서 그대로 진행하였습니다.
Next is the rear fender.
To remove the roof rack, the headliner has to be removed.
There was no need to remove the roof rack for this job, so it was done as is.
휠가니쉬 랩핑입니다.
보통 요즘 SUV들은 따로 파츠가 있어서 랩핑할 부위도 더 많아집니다.
Here is wheel garnish wrap.
SUVs these days usually have these parts separately, which means more parts to wrap.
다음은 앞휀다와 사이드스컷 랩핑 작업입니다.
스컷 모양이 보통 차들과는 많이 달라 조금 더 까다로운 작업입니다.
Next are the front fenders and side skirts.
Side skirt shape is a little complicated compared to other cars.
앞범퍼 시공입니다.
X7 앞범퍼는 나름 쉬운 편이였습니다.
마감할 부위들이 조금 많았지만 크게 어렵다고는 안 느껴졌습니다. ㅎㅎㅎ
Here is front bumper installation.
X7 front bumper was rather on the easier side.
There were a lot of finishes to do, but it wasn't too difficult at all.
다음은 뒷범퍼입니다.
앞범퍼 보단 더 쉬운? 모양입니다.
범퍼가 어렵지 않아 에너지를 많이 절약했습니다. ㅋㅋㅋ
Next is the rear bumper.
It's a little easier? than the front bumper.
The bumpers this time weren't too hard so a lot of energy was saved. Haha.
그리고 마지막으로 트렁크 작업입니다!
상단, 중간, 하단 총 세 파츠로 나눠져있습니다.
하단은 안쪽까지 완벽하게 랩핑하였습니다.
And lastly the trunk wrap!
It's divided in total 3 parts. Upper, mid, and lower.
The lower trunk has been fully wrapped all the way to the inside.
유광메탈릭골드로 전체랩핑을 완료한 X7입니다.
사틴블랙과 비교를 하면 완전 다른 느낌으로 변신하였습니다.
골드에 메탈릭이 들어간 필름이라 필름 색이 많이 예쁘네요.
손님도 결과를 너무 좋아하셨습니다~ ^^
Here is X7 fully wrapped in gloss metallic gold.
Compared to satin black, it has transformed into a completely different feeling.
It's a gold film with metallic, so the color of the film is very pretty.
Customer was also satisfied with the outcome~ :)
이번 포스팅도 끝까지 읽어주셔서 감사드립니다.
포항 랩핑 & PPF 전문점 랩케빈이었습니다.
궁금하신 점이 있으시면 언제든 편하게 문의해 주세요!
최선을 다해 친절히 도와드리겠습니다! ^^
Thank you taking the time to read this post until the end.
I am Kevin from WRAP KEVIN, shop based in Pohang specializing in wrapping & PPF.
If you have any questions at all, feel free to contact me anytime.
I will kindly assist you to my furthest ability! :)
랩케빈 (한국어/영어 문의)
전화/문자:
카톡, 톡톡, 인스타DM
튜닝·정비 AI 추천 상담 앱